| JoeCustoms.com https://docs.joecustoms.com/forums/ |
|
| Need inputs on a custom https://docs.joecustoms.com/forums/viewtopic.php?f=15&t=7687 |
Page 1 of 1 |
| Author: | Fett80 [ Sun Apr 13, 2008 10:22 pm ] | ||
| Post subject: | Need inputs on a custom | ||
I want tot try my hands at making a Darth Krayt custom. I have the helmet figured out, but the body is what really concern me. Here is a picture of what he looks like. Can you guys help me find a body that could make a good base for that custom? I want him to fit my other Star Wars customs and figure so he must be 3 3/4 or very close. Thanks!
|
|||
| Author: | Darko [ Sun Apr 13, 2008 11:33 pm ] |
| Post subject: | Re: Need inputs on a custom |
I think no matter what, you'll have to do a lot of sculpting. If you could find a Predator microman, it looks like some of the armor configuration would be similar. If you wanted to go for a larger figure, a SHS Colossus might be a good idea. |
|
| Author: | DarkJedi [ Mon Apr 14, 2008 12:51 am ] |
| Post subject: | Re: Need inputs on a custom |
Too bad there isn't a male Witchblade... |
|
| Author: | Fett80 [ Mon Apr 14, 2008 2:19 am ] |
| Post subject: | Re: Need inputs on a custom |
Darko wrote: I think no matter what, you'll have to do a lot of sculpting. If you could find a Predator microman, it looks like some of the armor configuration would be similar. If you wanted to go for a larger figure, a SHS Colossus might be a good idea. Yeah, I do have microman predator figure, but there will be alot of sculpting to be done there. I was looking on ebay the other day and I found some cool looking knights from a chinese or japanese serie of figure. They weren`t the good color but they were not to bad. The only problem there is I can`t find them anymore 
|
|
| Author: | raptor [ Mon Apr 14, 2008 5:53 am ] |
| Post subject: | Re: Need inputs on a custom |
Is the new turtle line going to have a Shredder? - R |
|
| Author: | Fett80 [ Mon Apr 14, 2008 2:14 pm ] |
| Post subject: | Re: Need inputs on a custom |
raptor wrote: Is the new turtle line going to have a Shredder? - R I just did some reserch on the net on ninja turtles, but I did not find anything  Are they 3 3/4 or close? |
|
| Author: | JBYRDD [ Mon Apr 14, 2008 3:08 pm ] |
| Post subject: | Re: Need inputs on a custom |
I think this would help you out... http://goodtogocustoms.com/forum/index.php?topic=31.0 |
|
| Author: | Fett80 [ Mon Apr 14, 2008 5:16 pm ] |
| Post subject: | Re: Need inputs on a custom |
JBYRDD wrote: Holy s&?%!!!!! That guy is uncredebly talented  I have never seen anything like this! This is by far the best sculpting I have ever seen!! Wow man. Thank for the info, I will defently try to duplicate that,but it will be alot simpler due to the fact that I can`t sculpt that well. |
|
| Author: | roguetiger [ Mon Apr 14, 2008 5:58 pm ] |
| Post subject: | Re: Need inputs on a custom |
Ask if he'll do a commission of that fig for you. 
|
|
| Author: | Fett80 [ Tue Apr 15, 2008 4:44 am ] |
| Post subject: | Re: Need inputs on a custom |
roguetiger wrote: Ask if he'll do a commission of that fig for you. This figure when finish is gonna be worth a thousan and I am not even joking 
|
|
| Author: | drone.devil [ Thu Apr 17, 2008 12:09 am ] |
| Post subject: | Re: Need inputs on a custom |
my approach would be to use a 25th Serpentor as the base, mod the crotch for posability, dremel off some detail, sculpt on the armor, and the shoulder pads i would actually try and use both shoulder pieces from the Xamot/Tomax set. |
|
| Author: | Fett80 [ Thu Apr 17, 2008 12:40 am ] | ||
| Post subject: | Re: Need inputs on a custom | ||
I just find out that Krayt, before he turned to the dark side, was named ASHARAD HETT. Hasbro has made that figure in a comic two pack with another ladie jedi. I am defenetly gonna use that head for my custom. So I should have the correct facial tatoos. 
|
|||
| Author: | Darko [ Thu Apr 17, 2008 2:57 am ] |
| Post subject: | Re: Need inputs on a custom |
Fett80 wrote: I just find out that Krayt, before he turned to the dark side, was named ASHARAD HETT. Hasbro has made that figure in a comic two pack with another ladie jedi. I am defenetly gonna use that head for my custom. So I should have the correct facial tatoos. Just remember, he's a few hundred years older as Krayt, so at least give him gray hair. And you'll have to mod that head for use with a ball-joint. It is, unfortunately, one of the few SW figures to still use a neck-peg. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|