| JoeCustoms.com https://docs.joecustoms.com/forums/ |
|
| Need a sanding tutorial https://docs.joecustoms.com/forums/viewtopic.php?f=15&t=10559 |
Page 1 of 1 |
| Author: | Rambo [ Sun Aug 10, 2008 11:43 pm ] |
| Post subject: | Need a sanding tutorial |
Hi everybody! Does anyone could tell me where to find a good sanding tutorial? Thx for the help. |
|
| Author: | Darko [ Tue Aug 12, 2008 2:37 am ] |
| Post subject: | Re: Need a sanding tutorial |
Could you be more specific what you're trying to do? I mean, basically, you just run sand paper over a part until you get it to the place you want it. For smoother results, use some water to moisten the area being sanded. Use heavy-grit paper if you need to make major modifications, fine grit if you just need to clean up edges or remove paint or something. Is there something in particular you're trying to accomplish? |
|
| Author: | Rambo [ Thu Aug 21, 2008 9:12 pm ] |
| Post subject: | Re: Need a sanding tutorial |
Thx for the reply. And yes, what I want to do is to "erase" Bigboa's straps. |
|
| Author: | Darko [ Thu Aug 21, 2008 10:15 pm ] |
| Post subject: | Re: Need a sanding tutorial |
Do you have a dremel? If so, use that to get off the bulk of them. If not, just use regular sand paper. After that, I'd suggest getting some needle files to do the detail work (I imagine you want to preserve the muscle structure). Just take it slow. |
|
| Author: | Rambo [ Fri Aug 22, 2008 9:03 pm ] |
| Post subject: | Re: Need a sanding tutorial |
Darko wrote: Do you have a dremel? If so, use that to get off the bulk of them. If not, just use regular sand paper. After that, I'd suggest getting some needle files to do the detail work (I imagine you want to preserve the muscle structure). Just take it slow. Thanks Darko. I have to get a moto-tool. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|