JoeCustoms.com
https://docs.joecustoms.com/forums/

Operation Manual #1 - Weird Science - Decal Sheet
https://docs.joecustoms.com/forums/viewtopic.php?f=10&t=45944		 Page 1 of 2
Author:  DanOfTheDead [ Sun Jul 09, 2017 1:10 am ]
Post subject:  Operation Manual #1 - Weird Science - Decal Sheet
Okay, going to get a final quote from a couple places and then start getting these made:

Operations Manual #1 - Weird Science

8x10 sheet of COBRA Red on Clear Vinyl Stickers.

8 Designs:
*COBRA High Altitude/Orbit/Space (CHAOS)
*COBRA Medic & Emergency Medicine
*COBRA Medical Research
*COBRA CORPORATION (Future COBRA logo, based on joecustoms.com Liberty group projects)
*COBRA Science Division
*COBRA Engineering and Technology
*COBRA Project Z (or, for "real world" COBRA, chemical weapons)
*COBRA Bio-Engineered Assets/Science/Training (BEAST) (or, for "real world" COBRA, animal handlers)

At least 2 Vehcile (1.25"), 2 Medium (.75"), and 5 Figure (.25") stickers per design. More if I can fit them.

Aiming at $5-6 per full sheet (that's all designs on one sheet), possibly with the option to buy each individual design section for ~$2 after purchasing 2 sheets

Shipping is going to be whatever it takes to get a large envelope to your address.

I think these are fun designs that a lot of collectors and customizers can make use of. My goal is to cover the cost of the project, if I do that, I'll be looking for suggestions in what people would like to see from a second set.

Ordering information coming soon.

*Preview is a lo-res sample, just to try to keep the designs under control for now. All symbols are fully detailed, crisp vector designs.

Attachments:
operationsmanual1sample.jpg
operationsmanual1sample.jpg [ 843.07 KiB | Viewed 1817 times ]
Author:  DarkJedi [ Sun Jul 09, 2017 1:31 am ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
If the decals had specific places where to cut, I don't think diecutting is necessary.

Can you show examples?
Author:  alleyviperelite [ Sun Jul 09, 2017 8:29 am ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
Customizers were notoriously cheap at one time and I still am so I see no problem as long as the cost savings keep the price low enough to be affordable. And I would prefer to cut my own anyway.
Author:  Tim 121RVC [ Sun Jul 09, 2017 8:59 am ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
If they're going to be unique and different from Cobrastickers.com I'd be interested.

I believe some of these logo's haven't been for sale anywhere yet: http://wiki.joecustoms.com/wiki/Category:Cobra_Logos

The Cobra Naval, Medical, Navy and Airborne logo's are on my want-list for a couple of years now.
Author:  Tim 121RVC [ Sun Jul 09, 2017 10:32 am ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
Hmm, how cool would it be to combine this with a Group Project? For example, if the subject is "Expand the Cobra Navy", participants buy a sheet and in the end we'd get to see a new naval force for Cobra.
Author:  OreoBuilder [ Sun Jul 09, 2017 11:44 am ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
I would, I have before. Rattlerrepros sells sticker sheets that are not pre-cut and I have bought from them a few times.

OB
Author:  Dusty79 [ Sun Jul 09, 2017 11:56 am ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
Tim 121RVC wrote:
If they're going to be unique and different from Cobrastickers.com I'd be interested.

.


I concur
Author:  Mysterious Stranger [ Sun Jul 09, 2017 12:05 pm ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
I prefer die-cut. But if the only way to get unique designs is without die-cutting then I could work with the.
Author:  2DARK2C [ Sun Jul 09, 2017 5:41 pm ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
I cut stickers a lot :)

I need a sheet of rock band logo's!
Author:  Redmao [ Mon Jul 10, 2017 1:59 pm ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
With a Graphtec cutter, you would be able to diecut a full 13 x 19" sheet in about 90 seconds. Add the cost of print, design and layout that would cost less than $5 for a full sheet of stickers.
If you want to launch a custom sticker business, it might be worth looking into. They work with wide format and regular digital print.
Author:  Wowboy [ Mon Jul 10, 2017 8:46 pm ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
Would you have a water slide option?
Author:  pluv [ Tue Jul 11, 2017 10:07 am ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
I have a whole folder of nothing but stickers and I've got sheets of ones I've made that need to be cut. I don't care about the cutting as much as the look and the fit.
Author:  GITrekker [ Tue Jul 11, 2017 5:48 pm ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
Having to cut them myself wouldn't bother me unless it was something that had to be a very precise circle. Anything else I can work with.
Author:  DanOfTheDead [ Wed Jul 12, 2017 12:25 pm ]
Post subject:  Re: Would you buy sticker sets that had to be cut out?
This is really helpful everyone, thanks for the responses.

Here's another question. Most of the designs I'm working on are new single color COBRA symbols.

On a sticker sheet, do you want more color options for each design (ex red, white, or black... no silver yet) OR more copies of each design in a single color (red)?
Author:  Dusty79 [ Wed Jul 12, 2017 12:29 pm ]
Post subject:  Re: Stick Sheet Question - More Colors, or More Copies
I would prefer variety in color
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/