Regularly $49.99, was marked down to $34.49, but now rings in at $14.99
- 1 flex-drive shaft
- 22 sanding sleeves
- 2 sanding sleeve mandrels
- 1 buffing wheel
- 6 buffing pads
- 1 leather buffing wheel
- 1 screw mandrel
- 10 diamond grinding points
- 4 silicon Carbide grinding wheels
- 3 nylon brushes
- 2 steel wire brushes
- 3 brass wire brushes
- 6 silicon carbide grinding wheels
- 6 aluminum oxide grinding wheels
- 1 honing stone
- 4 collets (1/16", 3/32", 1/8"(2))
- 3 cut-off wheel madrels
- 5 fiberglass cut-off wheeles
- 1 flapper sander
- 37 sanding discs
- 28 aluminum oxide cut-off wheels
- 6 High Speed drill bits
- 1 collet wrench
Specs:
- 120VAC, 60hz, 1.0 Amp
speed: 8,000 - 30,000 RPM
I don't do much customizing due to severe time limitations, but for this price I picked the set up as I plan to, someday.