Regularly $49.99, was marked down to $34.49, but now rings in at $14.99
- 1 flex-drive shaft
- 22 sanding sleeves
- 2 sanding sleeve mandrels
- 1 buffing wheel
- 6 buffing pads
- 1 leather buffing wheel
- 1 screw mandrel
- 10 diamond grinding points
- 4 silicon Carbide grinding wheels
- 3 nylon brushes
- 2 steel wire brushes
- 3 brass wire brushes
- 6 silicon carbide grinding wheels
- 6 aluminum oxide grinding wheels
- 1 honing stone
- 4 collets (1/16", 3/32", 1/8"(2))
- 3 cut-off wheel madrels
- 5 fiberglass cut-off wheeles
- 1 flapper sander
- 37 sanding discs
- 28 aluminum oxide cut-off wheels
- 6 High Speed drill bits
- 1 collet wrench
Specs:
- 120VAC, 60hz, 1.0 Amp
speed: 8,000 - 30,000 RPM
I don't do much customizing due to severe time limitations, but for this price I picked the set up as I plan to, someday.
_________________
Quote:
G.I. Joe is a superior film to Transformers in every way. It is, hands down, the most action packed movie of the summer. Any kid who hates the movie should be taken out back and beaten with a two by four because I can't imagine any kid not liking this
