| JoeCustoms.com https://docs.joecustoms.com/forums/ |
|
| 25th/O-ring customizer question https://docs.joecustoms.com/forums/viewtopic.php?f=10&t=13378 |
Page 1 of 1 |
| Author: | Doberman [ Mon Dec 08, 2008 2:42 pm ] |
| Post subject: | 25th/O-ring customizer question |
I prefer the O-ring figures for my customizing but I was wondering if the arms and legs from the 25th line might work with O-ring? I assume there's no t-bar on the 25th but could you use an O-ring t-bar with legs from the 25th line? |
|
| Author: | Straight Edge [ Mon Dec 08, 2008 2:58 pm ] |
| Post subject: | Re: 25th/O-ring customizer question |
The 25th design absolutely incorporates the class t-bar. It's a modified bar, of course, without the hook, and it's embedded into the lower waist, but the small dumbell-looking points at the bottom, where the upper legs attach, is basically the same design. Size problems may ensue, but that's easily fixed either by dremeling (to make the leg cavities larger), or the ever-popular Krazy-glue method of building up the t-bar joint. But yes, the legs are completely capable of being customized onto a vintage or new-sculpt body. |
|
| Author: | Doberman [ Mon Dec 08, 2008 3:00 pm ] |
| Post subject: | Re: 25th/O-ring customizer question |
Great, thanks. |
|
| Author: | Mysterious Stranger [ Mon Dec 08, 2008 8:20 pm ] |
| Post subject: | Re: 25th/O-ring customizer question |
Arms should work the same as well. I've used O-ring arms on 25th figures so the other way should work too. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|